Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another RAM 1500 model year.
Safety recall notices and repair campaigns registered for the 2018 RAM 1500 in Canada.
On certain trucks, the side curtain airbag inflators may be defective. As a result, the driver and/or passenger side curtain airbag inflator(s) could rupture unexpectedly and metal fragments could be propelled toward vehicle occupants. Note: This is an expansion of Transport Canada recall 2025-013.
An airbag inflator that ruptures can create a risk of injury.
FCA Canada will notify owners in writing and advise you to take your truck to a dealership to replace the affected side curtain airbag(s).
On certain trucks, the side curtain airbag inflators may be defective. As a result, the driver and/or passenger side curtain airbag inflator(s) could rupture unexpectedly and metal fragments could be propelled toward vehicle occupants. Note: This recall also affects certain 2016 model year RAM 3500 chassis cab incomplete vehicles.
An airbag inflator that ruptures can create a risk of injury.
FCA Canada will notify owners in writing and advise you to take your truck to a dealership to replace the affected side curtain airbag(s).
On certain vehicles equipped with a 3.0 L diesel engine, a problem with the engine tone wheel could cause a loss of signal to crankshaft position sensor. If this happens, the engine could stall and you may not be able to restart it. Note: Vehicles included in FCA recall W58 (Transport Canada recall 2020-371) are not part of this recall.
A sudden loss of engine power could increase the risk of a crash.
FCA Canada will notify owners by mail and advise you to take your vehicle to a dealership to update the powertrain control module. This update will help maintain engine power if the crankshaft position signal is lost.
On certain vehicles equipped with a 3.0 L diesel engine, the high-pressure fuel pump could fail. If this happens, you may notice a change in engine performance, a fuel leak, or a malfunction indicator lamp and/or service electronic throttle control tell-tale may turn on. This could also result in a sudden loss of engine power while driving.
A sudden loss of engine power could increase the risk of a crash.
FCA Canada will notify owners by mail and instruct you to take your vehicle to a dealership to replace the high-pressure fuel pump. Additional fuel system parts may be replaced, if necessary.
On certain vehicles equipped with a 3.0 L diesel engine, a problem with the engine tone wheel could cause a loss of signal to crankshaft position sensor. If this happens, the engine could stall and you may not be able to restart it.
A sudden loss of engine power could increase the risk of a crash.
FCA Canada will notify owners by mail and instruct you to take your vehicle to a dealer to update the powertrain control module. This update will help maintain engine power if the crankshaft position signal is lost.
On certain trucks equipped with a 3.0-L EcoDiesel engine, the exhaust gas recirculation (EGR) cooler could crack internally and leak. If this happens, a driver may notice a low coolant level or a heater that does not work properly.
A cracked EGR cooler could create the risk of an engine fire.
FCA Canada will notify owners by mail and instruct you to take your vehicle to a dealer to replace the EGR cooler. Dealers will also inspect intake manifold and replace it as necessary.
On certain trucks equipped with a power locking tailgate, the tailgate may open while driving. If this occurs, cargo that is not secured could fall out of the truck bed and onto the road. Note: This is an expansion of recall U74 (Transport Canada recall 2018-398).
Cargo that falls from the truck bed could create a road hazard for others.
The company will notify owners by mail and instruct them to take their truck to a dealer to modify the tailgate locking mechanism. Note: This recall supersedes recall 2019-221
This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act.
Glass that breaks in to large pieces could create a risk of injury.
The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
On certain vehicles, the instrument cluster may not work.
An instrument cluster that does not work may prevent an operator from receiving information regarding the status of vehicle systems. This could increase the risk of a crash.
The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the instrument panel cluster replaced.
Note: This recall is superseded by recall 2019441. Please see recall 2019441 for more information. On certain trucks equipped with a power locking tailgate, the tailgate may open while driving. If this occurs, cargo that is not secured could fall out of the truck bed and onto the road. Note: This is an expansion of recall U74 (Transport Canada recall 2018-398).
Cargo that falls from the truck bed could create a road hazard for others.
The company will notify owners by mail and instruct them to take their truck to a dealer to modify the tailgate locking mechanism.
On certain 4x4 trucks, the rear driveshaft may not have been properly welded. As a result, a weld could break and cause the driveshaft to detach from the truck. If the vehicle was in rear wheel drive mode, this would cause a loss of propulsion.
A driveshaft that detaches could result in a loss of propulsion, increasing the risk of a crash. Additionally, a driveshaft that separates from the truck could create a hazard for other drivers and nearby people.
The company will notify owners by mail and instruct you to take your truck to a dealer to replace the rear driveshaft with one that is properly welded.
On certain vehicles, the rear axle may not have been properly filled with oil. This could cause the axle to generate excessive noise and fail prematurely, resulting in loss of motive power and increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the rear axle oil level. Vehicles found with a rear axle with no oil or a low oil level will have the rear axle replaced.
A failure of this component (powertrain) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain vehicles may have been built with a defective powertrain controller. If the powertrain controller fails while driving the engine may stall, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the powertrain controller.
A failure of this component (powertrain) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain vehicles equipped with a rearview mirror backup camera display may fail to conform to the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 111 – Mirrors and Rear Visibility Systems. Some conditions may cause the system not to display a rearview image, which is contrary to the requirements of the standard. This could increase the risk of property damage or injury to nearby pedestrians in the event the driver does not check surroundings through traditional means. Correction: Dealers will replace the rearview mirror.
A failure of this component (other) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, an electronic fault may create a situation where the cruise control cannot be deactivated. If this occurs and the driver does not apply the brakes or shift the transmission to neutral, the vehicle could maintain speed or accelerate without warning, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the Powertrain Control Module (PCM) software and perform an update as necessary. Note: In the interim, owners are advised not to use the cruise control until the vehicle is repaired.
A failure of this component (engine) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles equipped with a steering column gear shifter, the brake transmission shift interlock (BTSI) may become inoperative. This could allow the steering column gear shifter lever to be shifted out of the PARK (P) position without depressing the service brake pedal or having the key in the ignition, which could result in unintended vehicle movement, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect and replace the BTSI as necessary. The Body Control Module (BCM) will also be updated.
A failure of this component (powertrain) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.