Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another BMW 3 Series model year.
Safety recall notices and repair campaigns registered for the 1991 BMW 3 Series in Canada.
On certain 318I, 318IC, 318IS, 325IC, 325IS, 325IX, 525I, 535I, 735I and 735IL vehicles, the fuel feed hose could harden and "set" over time due to engine compartment temperatures. If this "setting" occurs, it is possible that seepage between the hose and fitting could result because the clamp cannot provide sufficient sealing force to compensate for the hardening of the hose. Fuel seepage, in the presence of an ignition source, could result in an engine compartment fire. Correction: fuel feed hoses and associated clamps will be replaced with ones of a new design.
A failure of this component (fuel system) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain 318I, 325I and M3 vehicles, elevated pressure in the cooling system due to overheating could result in cracking of the heater core end piece. Should this happen, coolant could be expelled onto the lower right leg of the driver, possibly resulting in personal injury and/or fogging of the interior surfaces of the windows causing reduced driver vision. Correction: A thermistatic bypass valve will be installed to control coolant temperature in the heater core. Also, a new design radiator cap will be installed to control pressure and provide greater overflow.
A failure of this component (heater and defroster) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain 325I vehicles, the windshield wiper switch ground screw, which also secures the wiper on one side, may loosen, causing erratic wiper/washer operation. This could result in impaired driver vision during inclement weather conditions. Correction: Windshield wiper switch ground wire attachment will be relocated on affected vehicles.
A failure of this component (visual system) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain 318I, 318IC and 318IS vehicles, at temperatures below -10 degrees centigrade with the engine partially or completely warmed up, condensation from the crankcase ventilation system may freeze at the throttle housing and prevent the throttle plate from fully closing when the accelerator pedal is released. This could result in a slow rate of deceloeration from speed or increased idle speed both of which may adversely affect vehicle control. Correction: Throttle house will be replaced with a version containing a modified heating system and the crankcase vent will be rerouted.
A failure of this component (engine) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain 318I and 318IS vehicles equipped with an airbag, the knee bolster may interfere with the lower steering column trim cover during a frontal impact. This may prevent the steering colomn from moving foward as designed, thus increasing the risk of driver injury. Correction: The knee bolster will be modified.
A failure of this component (seats and restraints) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.